Pioneer Water Tanks Model XLE 50/03

with 97,148-Gallons Capacity

Pioneer Water Tanks horizontal logo

START WITH A QUOTE


Call Now (916) 287-8873

 

MODEL

Pioneer Water Tanks XLE 50/03

CAPACITY

97,148-Gallons Nominal Capacity

DIAMETER

39′ 6″ Diameter

WALL HEIGHT

10′ 7″ TANK WALL HEIGHT

Pioneer Water Tanks 100,000 Gallon water storage system is engineered with a three-ring wall height with increased roof trussing and tank wall reinforcement. This commercial water storage system utilizes the heavy-duty roof that is structurally designed to enable mounting of features such as a vent hatch and or platforms.

 

The commercial 100,000-gallon water storage system series can be configured to the application with accessory options. Our engineering packages work with local engineering consultants to provide for the permitting.

ONLY PIONEER HAS OVER 30-YEARS OF PROVIDING…

1. The AQUALINER® Fresh, the only antimicrobial tank liner in the world.

2. The V-LOCK tank body construction system for strength and durability.

3. The industry-leading 20–year conditional warranty on the tank and liner.

4. The heavy-duty roof truss system, manufactured for extreme conditions.

5. Our standard accessories and commercial upgrades expand the functionality of your tank.

Commercial Pioneer Water Tanks America

100,000-GALLON WATER STORAGE TANK SYSTEM

The 100,000-Gallon model of Pioneer Water Tank is a three stacked panel system with increased roof trussing and wall panel enforcement. Wall panel sheets are pre-curved for each tank size to achieve the required circumference. Tank walls are comprised of three stacked rings bolted together with reinforcement. An overflow outlet is placed in one upper wall panel to account for design seismic sloshing effects. The overflow outlet height varies by tank size.

 

The XLE 50/03 Pioneer Water Tank is designed in accordance with AS2304 “Water storage tanks for fire systems” which references AS1170-2 Structural design actions Part 2 – Wind actions. The wind design parameters are:

• Importance level 2 (Normal Structures)
• 25-year design life (200-year recurrence interval)
• Region B
• Terrain Category 2
• Structure height < 5 metres (16.4ft)
• Topographical and shielding factors = 1.0
• Basic regional wind velocity = 51.8ms-1 (115.9mph)
• Resulting design pressure = 1.21kPa (25.3psf)

DESIGN SEISMIC LOADS

 

This tank is designed to withstand an effective seismic acceleration coefficient of up to 0.7 (refer Tables 2 & 3) and the seismic loads developed as per AS2304 which has the same methodology as AWWA D 103-97 “Factory Coated Bolted Steel Tanks for Water Storage”. The attached calculation sheets are for a seismic acceleration coefficient of 0.7.

DESIGN ROOF LIVE OR SNOW LOADS

 

Pioneer Water Tanks XLE-S series tanks are designed to withstand a maximum uniformly distributed live load or snow load of 1.0kPa (20psf) or a concentrated load of 1.4kN (300lbs) with the addition of internal and external columns and diagonal truss bracing. Roof support structures (trusses) are designed to accommodate maintenance and construction footfalls in the vicinity of the roof trusses. Roof activity shall be limited to installation and/or maintenance purposes. Roof structures shall not be altered or re-roofed without professional engineering
advice.

NSF 61 Approved Pioneer Water Tanks for potable water

NSF 61 Certified

NFPA 22 Pioneer Water Tanks for firefighting

Commercial Accessories

AQUALINER® Fresh

Engineering Packages

SITE / FOUNDATION REQUIREMENTS

 

(1) Recommended concrete compressive strength is 17MPa (2,500psi).

(2) Minimum allowable bearing capacity is 72kPa (1,500psf).

(3) The foundation must be embedded a minimum 300mm (12″) below existing grade to bear upon undisturbed native soils. If topsoil, organic materials, or uncontrolled fill soils are encountered, then the footing trench shall be over-excavated to remove those materials until undisturbed native soils are encountered. The trench can then be backfilled with concrete or engineered structural fill.

(4) Should there be any doubt about the stability or strength of the bearing soils, or if corrosive soil conditions are suspected, site-specific professional engineering advice should be sought.
(5) Refer to Drawing “XL50-RB-23-001” for additional requirements for the XLE-S 50/03 snow load tank.

Pioneer Water Tanks Foundations

The foundation for Pioneer Water Tanks depends on the location and application of the water storage project. Pioneer Water Tanks may have the option to sit on a clean sand pad base or may be required to be anchored to a concrete ring beam depending on the local authority.

This short video shows a concrete ring beam being installed for a 51,785-Gallon Pioneer Water Tank in Nothern California.

Concrete ring beam outline for Pioneer Water Tanks

The ring beam drawings specify the size, number and spacing of the reinforcing bars and ligatures to be used as well as the MPA rating for the concrete. Ring beams should be as level as possible and have no more than +/- 1/16” over any 5’0” (+/- 2mm over any 2m) of the circumference at the tank wall position and +/- 1/8” (+/- 4mm) over the entire ring beam. A survey chart will need to be completed and returned to your local installer for approval before the construction is started.

Concrete ring beam for Pioneer Water Tanks

The local Pioneer Water Tanks installer needs to ensure that foundation conditions are adequate. All water storage systems are subject to the local authority requirements so Pioneer Water Tanks also recommends local installers adhere to that authority for the tank location.

ADD FUNCTIONALITY TO YOUR PIONEER WATER TANK

Expand the functionality of your water storage system with our commercial accessory options. Pioneer Water Tanks can be configured to the project requirements with the option to add our engineering package for permitting.

Pioneer Water Tanks are engineered to NFPA standards for water storage for fire protection. The tank body and roof are made of Zincalume® Steel, which is proven to withstand fire immersion. The tank’s firefighting adapters and nozzles are compatible with fire hoses across North America.

 

Pioneer Water Tanks can be configured for cyclonic and seismic conditions, as well as heavy industrial zones. Additional accessories are available for different compliance needs. Outfit your tank with anti-vortex fittings and firefighting adapters for quick access during a fire emergency.

 

Fire Protection Tanks range from 7 to 11 feet in height with gross capacities ranging from 3,170 gallons to 97,744 gallons to accomplish your compliance needs. Learn More

FIRE HOSE FITTINGS

 

Be ready for fire emergencies with our fast, convenient firefighting valve options. Outfit your tank with anti-vortex fittings and firefighting adapters for quick access during a fire emergency.

Pioneer Water Tanks horizontal logo

START WITH A QUOTE


Call Now (916) 287-8873

 

Pioneer Water Tanks America offers our standard water storage tank models with the option to upgrade or addon accessories

Tank CodeUS GallonsDiameter

XLE 15/02

20,24322′ 0″

XLE 23/02

29,09326′ 4″

XLE 30/02

39,62630′ 9″

XL 40/02

51,78535′ 2″

XL 50/02

65,56739′ 6″

XL 50/03

97,14839′ 6″

Custom Sizes

CustomDesigned to Project

Pioneer Water Tanks horizontal logo

916-287-8873

 

Sacramento, California 95448